Bisley planfiles are available in multiples of five drawer units in two sizes (A0 and A1). Intermediate five drawer sections are also available which can be added at a later date to increase capacity. All cabinets are fitted with locks as standard.

Drawers are mounted on smooth running ball bearing slides, which allow for fingertip movement of the drawer even when fully loaded.

 

 

 

 

 

 

 

 

 

 

 

 

Each drawer is fitted with a front hinge pressure bar and a rear hood to prevent plans from curling or becoming creased. Drawers are slotted to enable dividers to sub-divide each drawer into other DIN A sizes. Each A0 drawer has been tested to an evenly distributed load of 110Lb. and A1 drawers to 55Lb.

A0 planfiles

A0 five drawer unit, complete with top and plinth
FCB4O
Overall dimensions (h x w x d) 508 x 1359 x 927mm
(20 x 53 1/2 X 36 1/2in)

A0 ten drawer unit complete with top and plinth
FCB 33
Overall dimensions (h x w x d) 914 x 1359 x 927mm
(36 x 53 ½ x 36 1/2in)

AO intermediate five drawer section only
FCB41
Overall dimensions (h x w x d) 406 x 1359 x 927mm
(16 x 53½ x 36½in)

Internal drawer dimensions
(h x w x d) 48x 1257x883mm (2 x 49 1/2 x 34 3/4in)

A1 planfiles

A1 five drawer unit complete with top and plinth
FCB 43
Overall dimensions (h x w x d) 508x 1010x691mm
(20 x 39¾ x 27 1/4in)

Al ten drawer unit complete with top and plinth
FOB 42
Overall dimensions (h x w x d) 914 x 1010 x 691mm
(36 x 39¾ x 27¼in)

Al intermediate five drawer section only
FOB 44
Overall dimensions (h x w x d) 406x 1010x691mm
(16 x 39¾ x 27¼in)

Internal drawer dimensions
(h x w x d) 48 x 908 x 660mm (2 x 35¾ x 26in)